Tripp Lite B140-1P0

The B140-1P0 is a receiver unit that is used with the B140-002 and B140-004 extender/splitter transmitter units, and it transmits a DVI-D Single-Link signal up to 100 ft. away using a single CAT 5e/ CAT 6 patch cable. To achieve maximum distance and resolution, use 24 AWG Solid Wire CAT 5e / CAT 6 cable (Tripp Lite's N202-Series). The B140-1P0 is compatible with all operating systems, and is plug and play, with no external power,…The B140-1P0 is a receiver unit that is used with the B140-002 and B140-004 extender/splitter transmitter units, and it transmits a DVI-D Single-Link signal up to 100 ft. away using a single CAT 5e/ CAT 6 patch cable. To achieve maximum distance and resolution, use 24 AWG Solid Wire CAT 5e / CAT 6 cable (Tripp Lite's N202-Series). The B140-1P0 is compatible with all operating systems, and is plug and play, with no external power, software or drivers required. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. Installation is simple. Connect a B140-002 or B140-004 transmitter (not included) to a DVI source using a Tripp Lite P561-Series DVI cable (not included). Connect the B140-1P0's built-in DVI connector to a display. Finally, the receiver unit is connected to an RJ45 port on the transmitter unit using a single CAT 5e / CAT 6 cable. A 1920 x 1080 at 60 Hz signal can be extended up to 50 ft. from the source, or a 1024 x 768 at 60 Hz signal up to 100 ft. Read More