Genuine Motorola 3V TVS Diode Array for Multi-Channel ESD and Surge Protection
The Motorola 4813977A43 is a high-performance 3V transient voltage suppressor diode array rated at 24W, designed for professional repair and maintenance of Motorola radio equipment. This genuine OEM component provides comprehensive multi-channel protection against electrostatic discharge, voltage transients, and surge events that can damage sensitive radio electronics. The SOT-23 surface-mount package offers compact, efficient protection for multiple signal lines simultaneously.
Key Features
- Genuine Motorola factory replacement part - ensures reliable circuit protection
- 3V clamping voltage for low-voltage signal line protection
- 24W peak pulse power capability for robust transient absorption
- Diode array configuration protects multiple channels in single package
- Fast response time for immediate overvoltage clamping
- Low clamping voltage to protect sensitive semiconductor components
- SOT-23 surface-mount package for space-efficient installation
- Lead-free (Pb-Free) construction for environmental compliance
Compatible Models
- Various Motorola commercial and professional two-way radio models
- Used in data interface protection, audio line protection, and control signal protection
- Consult your radio's service manual or schematic diagram for exact component location
What's Included
- One (1) Motorola 3V 24W TVS diode array
Application and Installation
Professional Installation Required: This transient voltage suppressor diode array is a critical protection component that requires proper installation to ensure effective circuit protection. Installation should only be performed by qualified electronics technicians or certified Motorola service centers with experience in SMD component replacement. Improper installation or incorrect component orientation can result in inadequate protection or component failure during transient events.
TVS diode arrays are strategically placed to protect multiple signal lines with a single component, reducing board space and component count. Common applications include USB data line protection, audio interface ESD protection, control signal surge suppression, multi-channel data bus protection, and I/O port overvoltage protection. The 3V clamping voltage makes this array ideal for protecting low-voltage digital signals, audio lines, and sensitive interface circuits operating at 2.5V to 5V logic levels.
Understanding Diode Array Configuration: Unlike single TVS diodes, diode arrays contain multiple protection diodes integrated into one package. The SOT-23 package typically includes protection for two or three signal channels with a common ground reference. Each protected line connects to one pin, while the common ground connects to another pin, creating a compact multi-channel protection solution.
Critical Installation Notes: TVS diode arrays must be installed with correct pin orientation. Each signal line requiring protection connects through the array to the common ground terminal. Verify proper pinout by consulting the component datasheet and PCB silkscreen markings. The protection device should be placed as close as possible to the connector or interface point for maximum effectiveness against fast transients.
Keep lead lengths and PCB traces short to minimize parasitic inductance, which can reduce protection effectiveness during fast ESD events. After installation, verify circuit operation and test voltage levels to ensure the TVS array is not conducting during normal operation. The array should only activate during overvoltage transient events, clamping voltage spikes to safe levels.
When to Replace
TVS diode arrays can degrade or fail due to repeated exposure to high-energy transients, ESD events beyond their rated capability, or cumulative stress from multiple surge events. A degraded or failed TVS array may allow damaging voltages to reach protected circuits, or it may develop increased leakage current affecting signal integrity. Replace TVS arrays if the radio has been exposed to severe static discharge, lightning-induced surges, or exhibits intermittent interface problems.
Technical Specifications
- Type: Transient Voltage Suppressor (TVS) Diode Array
- Clamping Voltage: 3V nominal
- Peak Pulse Power: 24W
- Configuration: Multi-channel array with common reference
- Package: SOT-23 surface-mount
- Compliance: Lead-free (Pb-Free) construction
- Device Marking: SA6A (visible on component)
Part Numbers
- Motorola Part Number: 4813977A43
- Component Designation: 3V 24W TVS Diode Array Suppressor
- Package Type: SOT-23 Surface-Mount
- Environmental: Pb-Free (Lead-Free)