The Keysight N9928A-112 FieldFox's QuickCal supports measurements such as insertion loss and gain, one-port cable loss, return loss, distance-to-fault, and S-parameters. QuickCal corrects for phase shift, time delay, and loss of adapters and jumper cables. It does not require a specific cal kit and is a very simple calibration. An optional load can be used during the QuickCal calibration process to obtain higher accuracy.If your…The Keysight N9928A-112 FieldFox's QuickCal supports measurements such as insertion loss and gain, one-port cable loss, return loss, distance-to-fault, and S-parameters. QuickCal corrects for phase shift, time delay, and loss of adapters and jumper cables. It does not require a specific cal kit and is a very simple calibration. An optional load can be used during the QuickCal calibration process to obtain higher accuracy.If your device under test (DUT) has type-N or 7/16, Male or Female connectors, either QuickCal or mechanical calibration can be used.If your DUT has 3.5 mm or SMA Male connectors, mechanical calibration is recommended. QuickCal can be used, but the accuracy is reduced.If your DUT has 3.5 mm or SMA Female or waveguide connectors, use mechanical calibration. QuickCal is not applicable.Mechanical calibration, which provides the best accuracy, is standard on FieldFox analyzers. QuickCal is optional.This SKU is for quoting purposes only. Please contact a Tessco sales representative for a customized SKU. Read More
