DURACOMM WM-10GMT-48N 48Vdc Wall Mount GMT Fuse Panel.Single Bus 60A Max, Fused in Negative Lead for (+) Ground Install.Up to 10 Fuses.15A/fuse

DURACOMM's WM-10GMT-48N is a wall mount 60 A, -48 VDC power distribution panel that provides up to 10 load circuits protected by individual GMT series fuses (fuses not included). Each circuit can be fused up to 15 A, with a total ten-circuit load of 60 A maximum. Heavy-duty DC input connectors provide strong 1/4 in studs to accept up to 60 at -48 VDC from a single power supply. All inputs and outputs are isolated from the frame. The…DURACOMM's WM-10GMT-48N is a wall mount 60 A, -48 VDC power distribution panel that provides up to 10 load circuits protected by individual GMT series fuses (fuses not included). Each circuit can be fused up to 15 A, with a total ten-circuit load of 60 A maximum. Heavy-duty DC input connectors provide strong 1/4 in studs to accept up to 60 at -48 VDC from a single power supply. All inputs and outputs are isolated from the frame. The WM-10GMT-48N is designed for use in a positive ground application. Fuses and LED status indicators, input, output, and alarm connections are all on the front of the unit. One (1) green LED is provided to indicate power supply status for a bank of ten (10) load circuits. When any fuse fails, a red LED is turned on to indicate the condition, and allow technicians to quickly find the WM-10GMT with the failed fuse. Form C relay contacts, which are isolated from the frame and power circuits, indicate when there is a fuse failure by providing normally open and normally closed contacts to activate remote alarm or monitoring systems. These contacts are available via a barrier strip. Additional DuraComm services are available to customize the WM-10GMT series distribution panels to your specifications. Read More