Deka TR4x5Z4-48JAB100

At only 26.0 in wide, the Deka Unigy telco rack allows for up to five (5) strings at 48 V to fit in the place of any 23 in rack. Providing up to 850 Ah in only 4.3 sq-ft, it is the smallest footprint of any NEBS Rated rack in the US. Unlike other equipment racks, the Deka Unigy telco rack is completely front accessible. All cable connections are front accessible, not mounted on the sides of the rack. On Deka Unigy telco racks, cables…At only 26.0 in wide, the Deka Unigy telco rack allows for up to five (5) strings at 48 V to fit in the place of any 23 in rack. Providing up to 850 Ah in only 4.3 sq-ft, it is the smallest footprint of any NEBS Rated rack in the US. Unlike other equipment racks, the Deka Unigy telco rack is completely front accessible. All cable connections are front accessible, not mounted on the sides of the rack. On Deka Unigy telco racks, cables are used on the sides of the rack instead of open copper buss bars, providing fewer un-insulated parts to cause damage, especially during a seismic event. The heavily insulated cabling is far safer than other tiered racks with thin or uninsulated side cover plates as protection from circuits, ground faults, and fires. The Deka Unigy telco rack output busbars are located on the top, recessed into the frame of the rack for protection but still accessible by 360 degrees. Additional 0.250 in air space along the sides of the batteries yet they are still held in by supports to prevent them from moving. This gives air flow to provide a cooler and longer life of the battery. Pre-wired and pre-assembled to expedite installations. Only anchoring and installation of the batteries is required. Fastest installation time of any rack Read More