The Cambium Networks C000000L141A is an indoor PoE injector that delivers 56VDC at up to 60W plus 10 Gigabit Ethernet data over a single RJ-45 cable. Cambium specifies it as the AC power injector for the 60 GHz cnWave V3000 and V5000 radios, and it accepts 90 to 264VAC through a C6 inlet. The AC line cord is sold separately.
Overview
Cambium Networks radios receive power and data over one Ethernet cable. The C000000L141A takes AC mains power in, combines 56VDC with the data from your switch or router, and sends both to the radio on its Data+Power Out port. It is the 10GbE member of Cambium's 60W injector family, so a 10GBASE-T uplink passes through without being stepped down to 1G or 5G.
The injector meets Energy Level 6 (DoE Level VI) efficiency requirements and carries UL 62368-1 safety certification, with ESD and line surge immunity tested to EN 61000-4-2 and EN 61000-4-5.
Key specifications
| Manufacturer | Cambium Networks |
|---|---|
| Part number (MPN) | C000000L141A |
| Cambium description | PoE, 60W, 56V, 10GbE DC Injector, Indoor, Energy Level 6 Supply |
| DC output voltage | 56VDC, plus or minus 5% |
| Output power | 60W maximum |
| Ethernet speed | 10GbE (10GBASE-T) |
| Data connectors | 2 x RJ-45 (Data In; Data+Power Out) |
| AC input | 90 to 264VAC, 47 to 63Hz |
| AC inlet | 3-wire IEC C6 (accepts a C5 line cord) |
| Efficiency | Energy Level 6 |
| Hold-up time | 10 ms minimum |
| Operating temperature | 0 to 50°C (32 to 122°F) |
| Humidity | 10 to 90% |
| Installation | Indoor use only (no IP rating) |
| Dimensions | 140 x 53 x 35 mm (5.5 x 2.08 x 1.37 in) |
| Weight | 0.24 kg (0.5 lb) |
| Safety | UL 62368-1 |
| Immunity | ESD: EN 61000-4-2; Line surge: EN 61000-4-5 |
| Environmental | RoHS / WEEE compliant |
Compatible Cambium radios
Cambium lists the C000000L141A as a supported AC input PoE injector for the following products:
| Radio | Nominal draw | Draw with Aux PoE device |
|---|---|---|
| 60 GHz cnWave V3000 | 30W | 60W |
| 60 GHz cnWave V5000 | 35W | 65W |
| 60 GHz cnWave V2000 | Listed as supported in the Cambium cnWave user guide | |
Power figures are from Cambium's Product Power Requirements and Power Supply Compatibility Matrix. If a V5000 is also powering a device from its Aux port, total demand can exceed this injector's 60W rating. For that case Cambium lists the N000000L179B outdoor AC/DC 100W power supply.
What's in the box
- 1 x Cambium C000000L141A 10GbE 60W 56V PoE injector
What else you'll need
- AC line cord with a C5 connector. For North America, Cambium offers N000900L031A (US Type B, 0.72 m) and N000900L007A (US Type B, 0.30 m). A standard C5 to NEMA 5-15P cord also fits the C6 inlet.
- Category 6A cable for a full-speed 10GBASE-T run. Cambium rates copper Ethernet to the cnWave radio at up to 100 m (328 ft). Cambium's outdoor CAT6A cable is available as N000000L155A (100 m) and N000082L172B (305 m).
- Surge protection rated for your link speed. Cambium's C000000L033A 56V surge suppressor is rated for 1000 Mbps, so it will limit a 10GbE link to gigabit.
Installation notes
- Connect the switch or router to Data In and the radio to Data+Power Out. Never connect Data+Power Out to a switch port or a non-PoE device.
- Mount the injector indoors or in a climate-controlled enclosure. It is not weatherproof and is rated for 0 to 50°C.
- Per the Cambium cnWave user guide, DC is carried on pins 3, 4, 5, 6 (V+) and 1, 2, 7, 8 (V-).
- Use an AC cord set rated and approved for the country of installation, as Cambium requires.
How it compares to other Cambium 56V injectors
| Part number | Output | Ethernet | AC inlet |
|---|---|---|---|
| C000000L141A | 56V, 60W | 10GbE | C6 |
| N000000L142A | 56V, 60W | 5GbE | C6 |
| N000000L034B | 56V, 30W | 5GbE | C6 |
| N000065L001C | 56V, 60W | 1GbE | C8 |
Choose the C000000L141A when the radio and the uplink both run at 10G, such as a cnWave V3000 or V5000 on a 10GBASE-T port.
Frequently asked questions
What does the Cambium C000000L141A power?
It powers Cambium radios that use 56V PoE and draw up to 60W. Cambium lists it for the 60 GHz cnWave V3000 and V5000, and the cnWave user guide also lists the V2000.
Does the C000000L141A include a power cord?
No. The injector ships without an AC line cord. It has a C6 inlet, so it takes a cord with a C5 connector, such as Cambium N000900L031A or N000900L007A for US outlets.
Why is it called a "DC injector" if it plugs into AC?
Cambium's name refers to the output. The injector runs on 90 to 264VAC mains power and puts 56VDC onto the Ethernet cable to the radio.
Can I use it outdoors?
No. It is rated for indoor use only, at 0 to 50°C and 10 to 90% humidity. Install it indoors or in a climate-controlled cabinet and run the Ethernet cable out to the radio.
Is the C000000L141A enough for a cnWave V5000 with an Aux device?
Not always. Cambium rates the V5000 at 35W alone and 65W with an Aux PoE load, which is above this injector's 60W maximum. Cambium lists the N000000L179B 100W outdoor AC/DC supply for that configuration.
What is the difference between the C000000L141A and the N000000L142A?
Both are 56V, 60W Cambium injectors with a C6 inlet. The C000000L141A passes 10GbE data and the N000000L142A passes 5GbE. Use the C000000L141A when you need the full 10G link.
What cable should I use for 10GbE?
Use Category 6A for 10GBASE-T. Cambium rates copper Ethernet from the cnWave radio at up to 100 m (328 ft).
Is this an IEEE 802.3at or 802.3bt injector?
Cambium does not specify IEEE 802.3at or 802.3bt compliance for this injector. Use it with Cambium equipment listed for it, and confirm compatibility before connecting any other powered device.
Sources: Specifications verified against the Cambium Networks C000000L141A specification sheet, the Cambium Networks Sub-6 GHz Fixed Wireless Accessories Guide (2023), and the Cambium Networks 60 GHz cnWave User Guide. Last reviewed September 2026 by the radioparts.com product team.
